Need to ensure the quality of Lanzhou lubricating oil so how to choose lubricating oil manufacturers？- Lanzhou Liulian Kunrun Petrochemical Co., LTD-皇冠真人线上下载手机版

Information dynamics

News

Hot recommendation

Need to ensure the quality of Lanzhou lubricating oil so how to choose lubricating oil manufacturers？

Category: Industry information Release time: 2023-04-10 Author: Lanzhou Liulian lubricating oil manufacturers

Share to:

Qr code sharing

        The use of lubricating oil depends on the working condition of the equipment, that is, the working intensity, speed, temperature and environmental status of the equipment, and the characteristics of lubricating oil need to be considered。Supporting lubricants are the key factors in the operation of various processing plants. Lanzhou Liulian lubricating oil is introduced as follows: When buying, be sure to pay attention。
        There are many kinds of lubricating oil in industrial production and they are widely used。In which bearing oil, gear oil, CNC lathe lubricating oil, high temperature heat transfer oil, freezing oil, rust inhibitor and other products, is a widely used in various industries of commodities。
        (1) The use of lubricating oil
        1、采用Lanzhou lubricating oilThe following three factors should be fully considered:
        (1) The working nature of industrial equipment after practical application (that is, working conditions);
        (2) Specific or strongly recommended instructions of the machinery manufacturer;

(3) Relevant regulations of lubricating oil manufacturers or strongly recommended。

Lanzhou lubricating oil

        2, Lanzhou lubricating oil characteristics index selection
        (1) Viscosity
        The viscosity of transmission gear oil is the index of various lubricating oil classification and classification, which has fundamental practical significance for product quality identification and clarity。The viscosity of the lubricating oil used in the machine and equipment is selected according to the design scheme or the calculation data information to check the relevant data chart。
        ⑵ pour point
        Pour point is an index that indirectly indicates the low temperature fluidity of lube oil in storage, transportation and use in Lanzhou。Work experience has proved that the application temperature of general lubricating oil is necessary to be 5~10℃ higher than the pour point。
        ⑶ Flash point
        Flash point is usually a very safe indicator of lubricating oil storage and use, and is also used as an indicator of manipulating lubricating oil vacuum residue and volatiles in the production process。The principle of lubricating oil flash point index requirements is to leave 1/2 safety performance according to safety management regulations, that is, the temperature is higher than 1/2 of the actual application。For example, the bottom temperature of the gas turbine oil shall not exceed 120 ° C, so the flash point of the internal combustion engine oil is required to be 180 ° C lower。

Lanzhou Liulian Kunrun petrochemical Co., LTD

Product center

Information dynamics

Need to ensure the quality of Lanzhou lubricating oil so how to choose lubricating oil manufacturers？